A heater is one of the most common appliances in use nowadays. These heaters are used in houses and in commercial buildings as well, and are designed to keep the place warm during the winter months. However, did you know that your heating furnace is the largest expense that occurs within the home on a monthly basis? In fact, on average, almost 45 percent of your home expenditure is apportioned towards the heater. If you do not maintain your heater on a regular basis, it’s only going to increase your costs considerably. It’s recommended that you follow some key tips to maintain your heater regularly. Here are four essential tips that you should keep in mind when it comes to maintaining your heater.
1. Clean or Replace the Filter
One of the main things that you need to do is clean the filter regularly. The filter that’s installed in the furnace is designed to clean the air and ensure that only warm air travels throughout the room. The filter is designed to prevent dirt from entering through the return air duct. This include pet dander, pollen, bacteria, spores, and other things. Inexpensive filters are only designed to provide basic protection. However, there are more expensive filters on the market that can be used to filter the air easily. Over time, the filter is going to get incredibly dirty, and this will lead to inadequate airflow. Ideally, you should clean the filter on a regular basis. It’s recommended that you clean or replace the filter to ensure the adequate flow of air.
2. Check the Blower Motor
Another important thing that you need to do is check the blower motor and ensure that it’s working smoothly without any hitches. The blower motor is designed to provide air throughout the vents and into the ducts. It’s recommended that you check the blower motor and ensure that it’s working at full capacity. If there is a problem with your blower motor, it’s recommended that you call a professional to check the motor and fix any problems.
3. Reduce Your Heating Load
Another simple way to keep the furnace running smoothly is to reduce your home heating load. Turn off the heater in the rooms when you are not around and make sure you limit your heating consumption. The more you run your heater, the more it’s going to cost you. Therefore, it’s recommended that you keep your heating load as low as possible. When the temperature is bearable, try to keep the heater as low as possible.
4. Avoid Flammable Objections Near the Heater
More importantly, you need to avoid keeping flammable objects near the heater as they can catch fire quickly. In most cases, the heater is usually located in a separate area of the room, so it’s recommended that you avoid placing any flammable items near the heater. These are just a few simple ways to keep your heater running smoothly. More information can be found on the www.lennoxdealerstoronto.ca website.
